Terex Hi-Ranger telescopic bucket trucks have become some of the most versatile aerial devices in the electric utility, construction, and telecommunications industries.
.tmb-425x.jpg?sfvrsn=9c3aa82f_1)
.tmb-425x.jpg?sfvrsn=5c6cb175_1)
.tmb-425x.jpg?sfvrsn=31cd99de_1)
.tmb-425x.jpg?sfvrsn=c07f8605_1)
.tmb-425x.jpg?sfvrsn=1d55bcbd_1)
.tmb-425x.jpg?sfvrsn=acb63140_1)
.tmb-425x.jpg?sfvrsn=10854070_1)
.tmb-425x.jpg?sfvrsn=c3f05f4a_1)
.tmb-425x.jpg?sfvrsn=ac24831c_1)
.tmb-425x.jpg?sfvrsn=6f7858ed_1)
.tmb-425x.jpg?sfvrsn=72ec82dd_1)
.tmb-425x.jpg?sfvrsn=c819da5_1)
.tmb-425x.jpg?sfvrsn=73c041c3_1)
.tmb-425x.jpg?sfvrsn=e5eed6b6_1)
.tmb-425x.jpg?sfvrsn=79474e4d_1)
.tmb-425x.jpg?sfvrsn=2e566333_1)
.tmb-425x.jpg?sfvrsn=9902adf1_1)
.tmb-240x.jpg?sfvrsn=9c3aa82f_1)
.tmb-240x.jpg?sfvrsn=5c6cb175_1)
.tmb-240x.jpg?sfvrsn=31cd99de_1)
.tmb-240x.jpg?sfvrsn=c07f8605_1)
.tmb-240x.jpg?sfvrsn=1d55bcbd_1)
.tmb-240x.jpg?sfvrsn=acb63140_1)
.tmb-240x.jpg?sfvrsn=10854070_1)
.tmb-240x.jpg?sfvrsn=c3f05f4a_1)
.tmb-240x.jpg?sfvrsn=ac24831c_1)
.tmb-240x.jpg?sfvrsn=6f7858ed_1)
.tmb-240x.jpg?sfvrsn=72ec82dd_1)
.tmb-240x.jpg?sfvrsn=c819da5_1)
.tmb-240x.jpg?sfvrsn=73c041c3_1)
.tmb-240x.jpg?sfvrsn=e5eed6b6_1)
.tmb-240x.jpg?sfvrsn=79474e4d_1)
.tmb-240x.jpg?sfvrsn=2e566333_1)
.tmb-240x.jpg?sfvrsn=9902adf1_1)
Available models:
Your crew will enjoy a healthier jobsite with the Terex WorkForce Power Take-Off by Viatec. Avoid loud engine idling on the jobsite and improve your crew’s ability to communicate with each other. WorkForce also reduces worker exposure to toxic exhaust fumes, and the surrounding community is sure to appreciate the reduction in noise pollution.
WorkForce Power by Viatec, is a simple and reliable plug-in electric power take-off (PTO). With simple connections to the hydraulic system, WorkForce electrically powers all the hydraulic functions of the utility truck – from the outriggers to the boom and the jib and winch. The WorkForce by Viatec also provides battery power to the chassis allowing auxiliary applications such as lighting and in-cab heating and cooling to operate while the truck engine is off.
WorkForce systems can be purchased as a factory install or a simple retrofit for your existing fleet of diesel equipment. The system is easy to use with hydraulic functions that feel the same as a diesel-powered PTO - but without the noise and emissions. Our system also features valuable operator aids like two, large, highly-visible LED strips that show the battery state of charge and a digital display that provides WorkForce usage, troubleshooting data, and other beneficial information.
WorkForce Power is available in four different storage capacities:
Terex® Bullet Tooth Rock Augers are designed to improve drill footage in medium to hard limestone and sandstone, cobbles, boulders and fractural rock formations.
Key Product Features:
Adapts (AB Chance) power installed screw anchor (PISA) tools to drive hex on pilot end of Terex BTA(SP) or ICH Augers.
6HOLE 5-1/2" - 10,000 FT/LB; 12HOLE 7-5/8" - 15,000 FT/LB
Part Number: 65375787
Terex® TXD Series digger derrick dirt augers are manufactured to improve the drilling performance of digger derricks, for loose and compacted soils, stiff clays and soft shale.
This series of Augers has bolt on shank plate design. Standard flighting on Terex® TXD Series digger derrick augers are as follows:
Standard components are as follows:
Teeth
Pilot
Terex® Spiral Bullet Tooth Rock Augers are designed with a unique tooth pattern that distributes the cutting action evenly. They can be used in virtually any ground conditions, with all of the standard Terex tooth offerings.
Adapts (TX pilot bits) to over pilot screw anchor tools to drive screw anchors into the ground. Allows installation of adapter without removing auger from Kelly bar. Simply pin Tool over TX pilot on bottom of auger.
Screw Anchor Adapter. Part Number: 65370407
Terex® TXC Series digger derrick carbide augers are manufactured to improve the drilling performance of digger derricks, for loose and compacted soils, stiff clays, shale, cobbles, and medium rock strata.
This series of Augers has bolt on shank plate design. Standard flighting on Terex® TXC Series digger derrick augers are as follows:
Standard components are as follows:
Teeth
Pilot
Adapts pilot bit onto end of auger to drive screw anchors into the ground. Allows installation of adapter without removing auger from Kelly bar. Simply remove existing pilot bit from auger and pin tool into boring head on bottom of auger.
Terex® Blade Augers are designed to improve drill footage in solid/non-fractured limestone and sandstone rock formations.
Key Product Features:
Terex® TXCS Series digger derrick rock augers are manufactured to improve the drilling performance of digger derricks, in limestone, medium sandstone, frozen materials, and medium to hard formations.
This series of Augers has bolt on shank plate design. Standard flighting on Terex® TXCS Series digger derrick augers are as follows:
Standard components are as follows:
Teeth
Pilot
Terex® Dirt Augers are designed to improve drill footage in loose to compacted soils, stiff clay, loose gravel and soft shale.
Key Product Features:
Terex® TRA Series digger derrick rock augers are manufactured to improve the drilling performance of digger derricks, in hard rock formations, solid (non-fractural) formations in medium to hard drilling conditions.
Standard flighting on Terex® TRA Series digger derrick augers have a 1” lower flight section, hard faced, combines with upper flighting as follows:
Standard components are as follows:
Teeth
Pilot
The Terex® Bullet Tooth Auger (BTA) is designed specifically to improve the drilling performance of digger derrick augers in hard, fractural material such as limestone, lava, backfill material as well as cobbles and boulder type drilling conditions.
The Terex® Bullet Tooth Auger (BTA) have a unique cutting pattern that allows each tooth to cut a small track which increases cutting efficiency and tooth life. Our cut pattern and tooth attack angle combine to allow the bullet teeth to act as “fingers” that penetrate through and lift up fractured or broken material. This tool works with the digger derrick core barrel with extendable pilot bit option to improve functionality & increase productivity.
Terex® Bullet tooth auger (BTA) is manufactured with 1” lower flighting and 1/2” upper flight. 5/16” optional upper flighting. Drills hard materials that conventional augers cannot.
Standard components are as follows:
Teeth
Pilot
The Terex® Bullet tooth spiral auger (BTASP) is designed specifically to improve the drilling performance of digger derricks in extreme conditions.
Terex® Bullet tooth spiral auger (BTASP) is manufactured with 1” lower flighting and 1/2” upper flight. 5/16” optional upper flighting. Drills hard materials that conventional augers cannot.
Standard components are as follows:
Teeth
Pilot
Hollow kelly bar with spring loaded cam action locking dogs allow it to be used as both an auger extension shaft and a screw anchor drive. This allows the screw anchor rod to be inserted directly into the kelly bar and eliminates the need for a screw anchor adapter. Available with welded couplers upon request.
The offered digital display is customizable - allowing drivers to view safety alerts and monitor the vehicle without distraction, while still maximizing optimal viewing in varying light conditions.
The lightweight lithium iron phosphate (LFP) battery comes with improved discharge and charge efficiency, low toxicity, no needed maintenance and a long cycle life.
The International eMV Series Chassis delivers high-quality features, such as applied corrosion protection, improved visibility through a new sloped hood and halogen headlamps, breakaway hood-mounted mirrors, and a durable cross-member system to deliver durability.
Converting the kinetic energy inherent in slowing the vehicle, the Terex EV harnesses that energy and stores it for later use - helping the chassis battery to recharge as well as improving the overall efficiency.
Count down displayed as battery is discharged. Last LED flashes green, yellow, red as battery drains.
The WorkForce Power Take-Off comes in two different enclosure sizes:
To preserve battery, the WorkForce Power Take-Off has a low speed option to run low-flow functions like tools.
Measurements
Power
Measurements
|
Nominal Kelly bar size |
Part number |
Nominal Kelly box size |
Hole Size |
Hole location |
|
3.00 |
65357613 |
3.13 |
1.13 |
2.00 |
|
4.00 |
65357614 |
4.13 |
1.13 Slot |
2.00 |
|
4.25 |
65357615 |
4.38 |
1.13 |
2.00 |
|
5.13 |
65357616 |
5.25 |
1.63 |
2.00 & 5.13 |
|
5.25 |
65357617 |
5.38 |
1.38 |
2.00 |
|
6.00 |
TA000081 |
6.13 |
1.13 slot |
2.00 |
|
7.00 |
TA002081 |
7.13 |
1.75 |
2.38 & 5.25 |
|
7.25 |
TA000873 |
7.38 |
1.63 |
2.00 & 6.00 |
|
8.00 |
TA002067 |
8.13 |
1.88 & 2.81 |
1.88, 6.75 & 10.75 |
|
Other configuration available upon request. |
||||
| Part number | Description | Diameter | Teeth Quantity |
|---|---|---|---|
| T29960 | C-016 Plate with C87 Teeth | 16 | 4 |
| T29961 | C-018 Plate with C87 Teeth | 18 | 5 |
| T29962 | C-020 Plate with C87 Teeth | 20 | 5 |
| T29965 | C-024-3 Plate with C87 Teeth | 24 | 6 |
Application:
Hollow kelly bar with spring loaded cam action locking dogs allow it to be used as both an auger extension shaft and a screw anchor drive. This allows the screw anchor rod to be inserted directly into the kelly bar and eliminates the need for a screw anchor adapter.
| Part number | Description | Hub | Bar |
| 445231 | 1.62 dia hole thru (2.16 OD x 1.46 ID sq tube for driving anchors) For 1.38” screw drive |
2.00 | 2.62 |
| 402331 | 1.62 dia hole thru (2.16 OD x 1.46 ID sq tube for driving anchors) For 1.38” screw drive
|
2.50 | 2.62 |
| 402330 | 1.62 dia hole thru (2.16 OD x 1.46 ID sq tube for driving anchors) For 1.38” screw drive |
2.62 | 2.62 |
| 470331 | 1.62 dia hole thru (2.16 OD x 1.54 ID sq tube for driving anchors) For 1.50” screw anchors |
2.62 | 2.62 |
|
Part number |
Code |
Application |
|
T29171 |
TX50/1650 |
Dirt, compacted soils, low abrasion materials, fits all TX– series shank plates & TX-50 replaceable tooth pilot. |
|
T29429 |
TX52/1652 |
Dirt, compacted soils, low abrasion materials, fits all TX-series shank plates & TX-50 replaceable tooth pilot. Recommended for outside blocks. |
|
TA029225 |
TX56/1656 |
Fractured and non-fractured materials, frozen soils, abrasive materials. Conical tips increase penetration rates in most materials. Fits all TX-series shank plates & TX50C pilot. |
|
TA029400 |
TX58/1658 |
Fractured and non-fractured materials, frozen soils, abrasive materials, conical tips increase penetration rates in most materials. Fits all TX-series shank plates & TX50C pilot. Recommended for outside blocks. |
|
65342386 |
TX56CH |
Non-fractured materials, frozen soils, abrasive materials. Tips increase penetration rates in most materials. Fits all TX-Series shank plates & TX50C pilot. |
|
65342385 |
TX58CH |
Non-fractured materials, frozen soils, abrasive materials. Tips increase penetration rates in most materials. Fits all TX-series shank plates & TX50C pilot. Recommended for outside blocks. |
| Part number | Bar size | Length |
|---|---|---|
| *11579 | 2.00 | 60.00 |
| T80597 | 2.00 | 72.00 |
| *9122145 | 2.50 | 60.00 |
| T80598 | 2.50 | 72.00 |
| **T54911 | 2.62 | 60.00 |
| 65357478 | 2.62 | 60.00 |
| T80599 | 2.62 | 72.00 |
| Other configurations available upon request | ||
| Part number | Hub | Bar | Length | Max torque | |
|---|---|---|---|---|---|
| Ft-lb | nm | ||||
| T80600 | 2.00 | 2.00 | 72 | 6,000 | 8126 |
| T82154 | 2.50 | 2.00 | 72 | 6,000 | 8126 |
| T84698 | 2.00 | 2.50 | 72 | 12,000 | 16251 |
| T71579 | 2.50 | 2.50 | 72 | 12,000 | 16251 |
| 65343450 | 2.50 | 2.50 | 60 | 12,000 | 16251 |
| T80601 | 2.50 | 2.62 | 72 | 14,000 | 19040 |
| T81388 | 2.62 | 2.50 | 72 | 12,000 | 16251 |
| 65347717 | 2.62 | 2.62 | 36 | 14,000 | 19040 |
| 65345762 | 2.62 | 2.62 | 60 | 14,000 | 19040 |
| T80602 | 2.62 | 2.62 | 72 | 14,000 | 19040 |
| Other configurations available upon request | |||||
|
Part Number |
Code |
Application |
|
65356802 |
PIN-5/8”OD/6”L |
For use on units with hollow kelly bar. |
|
65351046 |
PIN-3/4”OD/6”L |
For use on units with solid kelly bar. |
|
65349080 |
PIN-1”OD/8-1/2”L |
Use with 4” kelly box & smaller and 6” kelly box. |
| Part number | Code | Description |
|---|---|---|
| T29167 | TX50D | Cast steel, replaceable TX50 & TX52 hardened steel teeth (T29171 & T29429). For dirt, compacted soil, stiff clay, fracturable material & gravel application. 7-1/2” Cut diameter. Includes hardware PN T42675 & T5973. |
| T85889 | TX50C | Cast steel, replaceable TX50 & TX52 hardened steel teeth (TA029225 & TA029400). For fractured & non-fracturable material, hard pan, frozen soil, cement, limestone & conglomerates application. 7-1/2” Cut diameter. Includes hardware PN T42675 & T5973. |
| T70797C | TPB1 | Optional on BTA series augers. 2-5/8” API Threads Four replaceable C10 teeth (65349085) 5-1/4” cut diameter. |
| TA017437 | TXBA9 | Adapter, pilot bit. Bolts directly to boring head and allows use of all 2-5/8” API pin pilot bits. Includes hardware PN T42675 & T5973. |
| T29948 | CP-16 | Pilot bit, 2” cut with 1” NC thread |
| T29934 | TXCP-18 | Pilot bit, 2” cut with 1-1/4-5 Acme threads. |
| TA000142 | CP-18 Collar | Pilot chuck, 1-1/4-5 STPE |
| 65342191 | TPB1-1-3/4” | BTA series augers Four replaceable C10 teeth (65349085) 1-3/4” square shank 5-1/4” cut diameter |
| T29894 | TBA-175 | Sub, 1.75” square collar |
| 65354183 | SPIRAL HEX | BTA series augers Six replaceable C30 teeth (TA001537) 2-5/8” hex shank 8-1/2” cut diameter Use with 65343434 sub |
| 65350998 | DIRT PILOT | BTA series augers Fishtail bit, 2-5/8” hex shank |
|
Other configurations available upon request. |
||
| Part Number | Hex Hub Size | Part Number | Description |
|---|---|---|---|
| TA000748 | 2.00 | TA001113 | 2.00"HEX x 2.50"BAR |
| T29641 | 2.50 | TA000100 | 2.50"HEX x 2.00"BAR |
| T70463 | 2.62 | TA000853 | 2.50"HEX x 2.62"BAR |
| TA000474 | 3.00 | TA000099 | 2.62"HEX x 2.00"BAR |
| TA000561 | 2.62"HEX x 2.50"BAR | ||
| TA001980 | 3.00"HEX x 2.50"BAR | ||
| Other configurations available upon request. | |||
| Style | Part Number | Description |
|---|---|---|
| S | 45142 | ASSY, 2" X 2" SLIP ON |
| S | 437927 | ASSY,2" X 2-5/8" SLIP ON |
| I | 11448 | BUSHING 2" X 2-5/8" |
| C | 9127787 | ASSY,2" X 2.50" CLAMP ON |
| C | 9119389 | 2-1/2" X 2-1/2" CLAMP ON |
| S | 431390 | ASSY,2-1/2" X 2-5/8" SLIP ON |
| S | 45143 | ASSY,2-5/8" X 2-5/8" SLIP ON |
| Assemblies include retainer ring and hardware. | ||
|
Part number |
Shim box outside size |
Shim box inside size |
Application |
|
65354105 |
3.00 |
2.63 |
Shim 3" Box to 2-1/2" Box |
|
65351830 |
3.50 |
3.12 |
Shim 3-1/2" Box to 3" Box |
|
65349007 |
4.00 |
3.12 |
Shim 4" Box to 3" Box |
|
65349008 |
4.00 |
3.63 |
Shim 4" Box to 3-1/2" Box |
|
Other configurations available upon request. |
|||
|
Part Number |
Code |
Application |
|
T29916 |
SM06 KM |
For drilling hard rock or concrete. Double-angle tip for maximum impact strength. |
|
T29917 |
SM02 KM |
For asphalt or abrasive applications. Sharp tip for improved penetration. |
|
65356913 |
SM02 TX |
For asphalt or abrasive applications. Sharp tip for improved penetration. |
|
T29914 |
TX87LR KM |
Hard rock or concrete. Sharp tip for improved penetration. |
|
T29915 |
C387LR KM |
For asphalt or abrasive applications. |
|
T29945 |
C87B KM |
45° mounting surface heavy duty design (has machined step for non-rotating tools). Welded with 7018 or 8018 low-hydrogen rod. |
|
T29946 |
C87HDS KM |
45° mounting surface extra heavy duty design (has machined shoulder in bore to provide extended life. Welded with 7018 or 8018 low-hydrogen rod. |
Terex® Dump Bottom Barrels Are available in a range of diameters and types.
Standard specifications are as follows:
Dump-Bottom Clean-out
Used to remove fluid type (mud) material from drilled shaft when material does not adhere to auger flighting. Manual or auto dump mechanism options available.
Dump-Bottom/Drill
Used for drilling loose sandy soil, small cobble stones and mud conditions when material does not adhere to auger flighting. Manual or auto dump mechanism options available.
| Part number | Description | Diameter | Teeth Qty | Part number | Description | Diameter | Teeth Qty |
|---|---|---|---|---|---|---|---|
| T29301 | TX810X | 8/10 | 1 | T29194 | TX24X2 | 24 | 4 |
| T29302 | TX12X | 12 | 2 | 65348648 | TX26/27X1 | 26/27 | 4 |
| T29224 | TX145X | 14 | 2 | 65348658 | TX26/27X2 | 26/27 | 4 |
| T29189 | TX16X1 | 16 | 2 | T29199 | TX30X1 | 30 | 4 |
| T29190 | TX16X2 | 16 | 2 | T29248 | TX30X2 | 30 | 4 |
| T29220 | TX18X1 | 18 | 3 | T29249 | TX36X1 | 36 | 4 |
| T29221 | TX18X2 | 18 | 3 | T29250 | TX36X2 | 36 | 4 |
| T29191 | TX20/22X1 | 20/22 | 3 | 65340693 | TX42X1 | 42 | 6 |
| T29192 | TX20/22X2 | 20/22 | 3 | 65340697 | TX48X1 | 48 | 7 |
| T29193 | TX24X1 | 24 | 3 |
|
Part number |
A |
B |
C |
D |
Max torque |
|
|
Kelly box |
Bar size |
diameter |
Bar length |
Ft-lb |
nm |
|
|
T47927 |
2.50 |
2.50 |
0.88 |
48 |
32,000 |
43386 |
|
65343326 |
3.00 |
2.50 |
0.88 |
48 |
32,000 |
43386 |
|
T11850 |
3.00 |
3.00 |
1.13 |
24 |
45,000 |
60943 |
|
T29849 |
3.00 |
3.00 |
1.13 |
36 |
45,000 |
60943 |
|
T29841 |
3.00 |
3.00 |
1.13 |
60 |
45,000 |
60943 |
|
TA000073 |
3.00 |
3.50 |
1.13 |
36 |
45,000 |
60943 |
|
TA000492 |
3.50 |
3.50 |
1.13 |
36 |
45,000 |
60943 |
|
65355081 |
4.00 |
4.00 |
1.13 |
36 |
118,000 |
159805 |
|
Kelly bar adapters are subject to maximum drill torque. |
||||||
|
Other configurations available upon request. |
||||||
|
Part number |
Code |
Application |
|
T29919 |
C31 KM |
For soft to hard rock and concrete. Carbide tip (3/8” dia.) provides strength and long tool life. |
|
65350198 |
C31 TX |
For soft to hard rock and concrete. Carbide tip (3/8” dia.) provides strength and long tool life. |
|
T29821 |
C32 KM |
For drilling most soils and broken or laminated rock. |
|
TA001370 |
RB31HD KM |
For drilling most soils and broken or laminated rock. |
|
TA001377 |
RB31SN-FL TX |
For drilling most soils and broken or laminated rock. |
|
TA001372 |
RB40XHD KM |
For drilling most soils and broken or laminated rock. |
|
TA001399 |
RC31XHD,TX |
For drilling most soils and broken or laminated rock. |
|
TA001537 |
RC31HD TX |
For drilling most soils and broken or laminated rock. |
|
T29228 |
TX40HD KM |
For drilling most soils and broken or laminated rock. |
|
T29920 |
TX31HDLR KM |
For drilling in soft to hard rock and concrete. |
|
TA000695 |
U40HD KM |
For augering and tunnel boring in extremely hard rock and concrete. Ballistic-style tip provides high impact strength. |
|
T69176 |
C30 TX |
45° mounting surface, accepts all short retainer teeth. Weld with 7018 or 8018 low-hydrogen rod. |
|
TA001405 |
RC30F TX |
For buckets, barrels, and special applications. Weld with 7018 or 8018 low-hydrogen rod. |
|
T29947 |
C30H/U40H KM |
45° mounting surface, Accepts all short retainer and snap ring teeth. Weld with 7018 or 8018 low-hydrogen rod. |
|
Part number |
Code |
Description |
|
65342191 |
C10 Bullet Pilot |
Standard on BTR series augers 12” in diameter and smaller. Four replaceable C10 teeth (PN 65349085). |
|
5-1/4” cut diameter. |
||
|
Use with T29894 sub. |
||
|
TA000818 |
Dirt Pilot |
Pilot bit, fishtail, 1-3/4” square shank. |
|
6” cut diameter. |
||
|
Use with T29894 sub. |
||
|
T29896 |
Dirt Pilot |
Standard on dirt series augers 12” in diameter or less. |
|
8” cut diameter. |
||
|
Use with T29894 sub. |
||
|
TA002069 |
C30 Bullet Pilot |
Standard on BTR series augers 14” in diameter and larger. |
|
Four C30 replaceable teeth (PN TA001537). |
||
|
6-3/4” cut diameter |
||
|
Use with TA000001 sub. |
||
|
65353918 |
C30 Bullet Spiral Pilot |
Standard on all BTR Spiral pressure tools. |
|
Six replaceable C30 teeth (PN TA001537) |
||
|
7-1/2 cut diameter. |
||
|
Use with TA000001 sub. |
||
|
TA001678 |
C4 Bullet Pilot |
Standard on BTRXHD series augers. |
|
Three replaceable C43T teeth (two TA001401 & one T29927). |
||
|
8-1/2” cut diameter. |
||
|
Use with TA000001 sub. |
|
65342191 |
C10 Bullet Pilot |
Standard on BTR series augers 12” in diameter and smaller. Four replaceable C10 teeth (PN 65349085). |
|
5-1/4” cut diameter. |
||
|
Use with T29894 sub. |
||
|
TA000818 |
Dirt Pilot |
Pilot bit, fishtail, 1-3/4” square shank. |
|
6” cut diameter. |
||
|
Use with T29894 sub. |
||
|
T29896 |
Dirt Pilot |
Standard on dirt series augers 12” in diameter or less. |
|
8” cut diameter. |
||
|
Use with T29894 sub. |
||
|
TA002069 |
C30 Bullet Pilot |
Standard on BTR series augers 14” in diameter and larger. |
|
Four C30 replaceable teeth (PN TA001537). |
||
|
6-3/4” cut diameter |
||
|
Use with TA000001 sub. |
||
|
65353918 |
C30 Bullet Spiral Pilot |
Standard on all BTR Spiral pressure tools. |
|
Six replaceable C30 teeth (PN TA001537) |
||
|
7-1/2 cut diameter. |
||
|
Use with TA000001 sub. |
||
|
TA001678 |
C4 Bullet Pilot |
Standard on BTRXHD series augers. |
|
Three replaceable C43T teeth (two TA001401 & one T29927). |
||
|
8-1/2” cut diameter. |
||
|
Use with TA000001 sub. |
|
65349023 |
Dirt Pilot |
Standard on dirt series augers 16” to 84” in diameter. |
|
8” cut diameter. |
||
|
Use with TA000001 sub. |
||
|
TA002043 |
Dirt HD Pilot |
Standard on dirt series augers. 96” and larger in diameter. 11” cut diameter. |
|
Use with TA000001 sub. |
||
|
T16845 |
TPB6 |
Standard on BLADE (TRA) series augers |
|
4-3/4” cut diameter. |
||
|
Use with T80342 sub. |
||
|
T70797C |
TPB1 |
Optional on BTR series augers. |
|
Four replaceable C10 teeth, (PN 65349085) |
||
|
5-1/4” cut diameter. |
||
|
Use with T80342 sub. |
||
|
65356030 |
C10 Bullet Pilot |
Optional on BTR series augers |
|
Six replaceable C10 teeth, (PN 65349085) |
||
|
6-1/4” cut diameter. |
||
|
Use with T80342 sub. |
||
|
65342406 |
C30 Bullet Pilot |
Optional on BTR series augers. |
|
Four replaceable C30 teeth, (PN TA001537) |
||
|
6-3/4” cut diameter. |
||
|
Use with T80342 sub. |
|
TA000870 |
PB87 |
Optional on BTR series augers. |
|
Four replaceable C87 teeth, (PN T29914) |
||
|
4-1/2” cut diameter |
||
|
Use with T80342 sub. |
||
|
TA000132 |
TPB9 |
Optional on BTR series augers. |
|
6” cut diameter. |
||
|
Use with T80342 sub. |
||
|
65355221 |
C20 Spiral Pilot |
Six replaceable C20 teeth (PN T29897) |
|
6-1/4” cut diameter. |
||
|
Use with TA000905 sub. |
||
|
TA000871 |
C30 Bullet Pilot |
Three replaceable C30 teeth (PN TA001537). |
|
5-1/2” cut diameter. |
||
|
Use with TA000905 sub. |
||
|
65342192 |
C30 Bullet Pilot |
Four replaceable C30 teeth (PN TA001537). |
|
6-1/2” cut diameter. |
||
|
Use with TA000905 sub. |
||
|
TA001081 |
C4 Bullet Pilot |
Two replaceable C4 teeth, (PN T29927). |
|
5-1/4” cut diameter. |
||
|
Use with TA000905 sub. |
|
TA000934 |
Pilot |
Replaceable C87 teeth, (PN 65356913). |
|
Replaceable center bit. (PN T29934). |
||
|
6-1/4” cut diameter. |
||
|
Use with TA000930 sub. |
||
|
TA001077 |
Pilot |
Replaceable C30 teeth, (PN TA001537). |
|
5” cut diameter. |
||
|
Use with TA000930 sub. |
||
|
TA000928 |
Pilot |
Replaceable C30 teeth, (PN TA001537). |
|
5-1/2” cut diameter. |
||
|
Use with TA000930 sub. |
||
|
TA001083 |
Pilot |
Replaceable C4 teeth, (PN TA029927). |
|
5” cut diameter. |
||
|
Use with TA000930 sub. |
|
Part number |
Code |
Application |
|
65340659 |
X156,STD |
General conditions. |
|
65351918 |
||
|
65352011 |
X156F,GAUGE |
General conditions. |
|
65340660 |
TIGER,X156 |
Hard penetration such as frost or semi-hard soils. |
|
65351919 |
||
|
65354108 |
X156TW,TWIN TIGER |
Hard penetration such as frost or semi-hard soils. |
|
65352070 |
X156,CARBIDE |
Hard penetration such as frost or semi-hard soils. |
|
65352071 |
X156F,CARBIDE GAUGE |
Hard penetration such as frost or semi-hard soils. |
|
65353900 |
BCKT C10 RCHDS/C |
Fractured and non-fractured materials, frozen soils, and abrasive materials. |
|
Replaceable C10 tooth, PN 65350265 |
||
|
65354106 |
BCKT C10 GAUGE/C |
Fractured and non-fractured materials, frozen soils, and abrasive materials. |
|
Replaceable C10 tooth, PN 65350265 |
||
|
65342161 |
WELD ON, 2" |
Use with bucket style teeth. Weld with 7018 or 8018 low-hydrogen rod. |
Terex® Spin Bottom Barrels Are available in a range of diameters and types.
Standard specifications are as follows:
Spin-Bottom Clean-out
Used to remove fluid type (mud) material from drilled shaft when material does not adhere to auger flighting.
Spin-Bottom/Drill
Used for drilling loose sandy soil, small cobble stones and mud conditions when material does not adhere to auger flighting.
|
Part Number |
Code |
Application |
|
T29937 |
C123HP,C10 |
For C10 series (.765 shank) bullet teeth & C87 teeth. |
|
T29952 |
C20HP |
For C20 series (.735 shank) bullet teeth. |
|
T29953 |
C30HP |
For C30 series (.99 shank) bullet teeth. |
|
65346865 |
C40 |
For removing C4 series step shank teeth with collars and DS teeth. |
|
TA001388 |
K150 |
For removing C4 series step shank teeth with collars and DS teeth. |
|
TA000127 |
KHP2 |
For removal of most bullet series teeth. Hardened tip provides long life. Used in conjunction with a hammer. |
|
TA000355 |
KAHP1 |
For removal of most bullet series teeth. Hardened tip provides long life. Fits all light-duty air-hammer guns with a .395” chuck. |
|
65343293 |
|
For removal of conical tools from blocks. Use with TC10 & TC20 teeth. |
|
65343294 |
|
For removal of conical tools from blocks. Use with TC4, TC30, & TC87 Teeth. |
|
TA000752 |
KRP1 |
For removal of snap ring, C4. |
|
TA000137 |
KRP4 |
For removal of snap ring, C4. |
|
TA000186 |
|
For KRP1 pliers. |
|
Part Number |
Code |
Application |
|
T16844 |
TRT1 TX |
Non-fractured material, frozen soil, abrasive material. Medium to hard rock. |
|
TA510184 |
TWT2 TX |
Non-fractured material, frozen soil abrasive material. Medium to hard rock. |
|
TA029321 |
TK55C KM |
Fractured and non-fractured material. Angle of attack & conical tips increase penetration rates in most augerable materials. Hard to very hard rock. |
|
T17318 |
TDB31/D7000 TX |
Soft earth digging, and clay materials. |
|
T69322 |
TAP3 TX |
Accepts all above teeth. Welded with 7018 or 8018 low-hydrogen rod. |
|
Part number |
Kelly box size |
Bar size |
Hole diameter |
Max Torque |
|
|
Ft-lb |
nm |
||||
|
T29835 |
2.50 |
2.50 |
1.13 |
32,000 |
43386 |
|
T19088 |
3.00 |
2.50 |
0.88 |
32,000 |
43386 |
|
TA001797 |
3.00 |
3.50 |
1.13 |
45,000 |
60943 |
|
T37833 |
3.00 |
4.00 |
1.13 |
67,000 |
90737 |
|
TA000704 |
3.50 |
2.50 |
0.88 |
32,000 |
43386 |
|
TA000354 |
3.50 |
3.00 |
1.13 |
45,000 |
60943 |
|
TA001800 |
3.50 |
4.00 |
1.13 |
67,000 |
90737 |
|
T29385 |
4.00 |
3.00 |
1.13 |
45,000 |
60943 |
|
T68482 |
4.00 |
3.50 |
1.13 |
45,000 |
60943 |
|
65347713 |
4.00 |
4.25 |
1.13 |
75,000 |
101571 |
|
TA001659 |
4.25 |
4.00 |
1.13 |
67,000 |
90737 |
|
65347779 |
5.13 |
4.00 |
1.13 |
67,000 |
90737 |
|
65351010 |
5.13 |
4.25 |
1.13 |
75,000 |
101571 |
|
TA000750 |
5.25 |
3.50 |
1.13 |
45,000 |
60943 |
|
TA000046 |
5.25 |
4.00 |
1.13 |
67,000 |
90737 |
|
T74055 |
5.25 |
4.25 |
1.13 |
75,000 |
101571 |
|
TA000197 |
6.00 |
4.00 |
1.13 |
67,000 |
90737 |
|
TA000781 |
7.00 |
4.00 |
1.13 |
67,000 |
90737 |
|
TA001782 |
8.00 |
5.25 |
1.38 |
118,000 |
159805 |
|
Kelly bar adapters are subject to maximum drill torque. |
|||||
|
Other configurations available upon request. |
|||||
|
Part number |
Code |
Description |
|
TA000930 |
Collar |
Sub, 2-7/8” IF |
|
TA000905 |
Collar |
Sub, 2-7/8” API |
|
T80342 |
Collar |
Sub, pilot, 4” diameter, 2-3/8” API |
|
TA000001 |
Collar |
Sub, 3” square |
|
T29894 |
Collar |
Sub, 1-3/4” square. |
|
TA001970 |
Pin |
Pin, 1-3/4” square shank |
|
Use with PN T29894 sub. |
||
|
TA000011 |
Pin |
Pin, 2-3/8” API Threads |
|
Use with PN T80342 sub. |
||
|
65343334 |
Pin |
Pin, 2-5/8” hex shank |
|
Use with PN 65343434 sub. |
||
|
TA000906 |
Pin |
Pin, 2-7/8” API Threads |
|
Use with PN TA000905 sub. |
||
|
TA000929 |
Pin |
Pin, 2-7/8” IF Threads |
|
Use with PN TA000930 sub. |
||
|
TA001862 |
Pin |
Pin, 3” square shank |
|
Use with PN TA000001 sub. |
Coring of fractural and non-fractural rock, non-reinforced and reinforced concrete. For use when material cannot be effectively drilled with conventional rock auger tools.
|
Part number |
Code |
Application |
|
T29926 |
C4/U44 KM |
For large diameter extra heavy duty style augers. Hard Rock conditions. |
|
T29927 |
C4-1 KM |
For large diameter extra heavy duty style augers; deep cutting applications. Medium Rock conditions. |
|
TA029927 |
C41 TX |
For large diameter extra heavy duty style augers. |
|
TA001532 |
RCDS05 |
For drilling and tunnel boring in the most extreme hard rock and concrete. |
|
TA000789 |
DS05 KM |
For drilling and tunnel boring in the most extreme hard rock and concrete. |
|
T29930 |
C7 KM |
For most cutting conditions. No collar. |
|
TA001402 |
RC4SSF TX |
For drilling in soft to medium-hard abrasive cutting conditions. Snap ring attached. |
|
TA001401 |
RC4LSF TX |
For medium to hard drilling conditions with added collar to prevent material from entering block and stopping tooth rotation. |
|
TA001406 |
RC4F TX |
For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod. |
|
T70796 |
RC4 TX |
45° mounting surface heavy duty design accepts all step shank tools. Welded with 7018 or 8018 low-hydrogen rod. |
|
TA000679 |
Snap Ring |
C4 Teeth Snap Ring |
|
65343300 |
Retainer Clip |
Push on Retainer Clip |
|
Part number |
Code |
Application |
|
TA001375 |
RB1LRSN KM |
Small diameter tip reduces vibration during concrete cutting. Long retainer. |
|
TA001371 |
RB3LR KM |
Fractured and non-fractured materials, frozen soils, and abrasive materials. Long retainer. |
|
TA001379 |
RB3SR KM |
Fractured and non-fractured materials, frozen soils, and abrasive materials. Short retainer. |
|
T29912 |
RL08/C3LR KM |
Cutting concrete and other tough cutting applications. Long retainer. |
|
T29913 |
RL09/C3SR94 KM |
For cutting concrete and other tough cutting applications. Short retainer. |
|
T68888 |
TX1HDLR KM |
For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Long retainer. |
|
T29911 |
TX1HDSR KM |
For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Short retainer. |
|
TA001376 |
RB1SR-SN KM |
Fractured and non-fractured materials, frozen soils, and abrasive materials. Short retainer. |
|
65342401 |
RL09 TX |
For cutting concrete and other tough cutting applications. Ideal use for Spiral BTA series. |
|
T70795 |
RL11 KM |
For cutting soft to medium-hard materials with good penetration. Dimpled retainer for increased holding power in grooved blocks. |
|
65349085 |
RC1LR-SN TX |
Small diameter tip reduces vibration during concrete cutting. Long retainer. |
|
65349086 |
RC1SR-SN TX |
Fractured and non-fractured materials, frozen soils, and abrasive materials. Short retainer. |
|
TA000897 |
C1HDSR RL10 KM |
For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Short retainer. |
|
65350265 |
RC1SR-SN TX |
Fractured and non-fractured materials, frozen soils, and abrasive materials Short retainer. |
|
TA001455 |
RS16 TX |
For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Short retainer. |
|
T29941 |
C10 KM |
45° mounting surface with a narrower face than C10HD style. Welded with 7018 or 8018 low-hydrogen rod. |
|
T29942 |
C10HD KM |
45° mounting surface. Extra-heavy-duty design. Welded with 7018 or 8018 low-hydrogen rod. |
|
TA001404 |
RC10F TX |
For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod. |
|
65350264 |
RC10FS TX |
For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod. |
|
Part Number |
Code |
Application |
|
T29897 |
C21 KM |
For most cutting applications. Especially good in soft to medium-hard material. Carbide tip (5/16” dia.) for fast penetration. Short Retainer. |
|
65350253 |
RC21HD TX |
Heavy duty design for extremely hard rock and concrete. Carbide tip (1/2” dia.) provides long tool life. Short Retainer. |
|
T29898 |
C21HD KM |
Heavy duty design for extremely hard rock and concrete. Carbide tip (1/2” dia.) provides long tool life. Short Retainer. |
|
T29900 |
C23 TX |
Drilling and core-barreling in soft to medium-hard rock with abrasive cutting conditions. Short Retainer. |
|
65340029 |
C23 KM |
Drilling and core-barreling in soft to medium-hard rock with abrasive cutting conditions. Short Retainer. |
|
TA001373 |
RB23 KM |
Soft to medium-hard rock with abrasive conditions. Short Retainer. |
|
T29901 |
C24 KM |
Drilling soft material. Sharp nose tip for high penetration. Short Retainer. |
|
T29938 |
RC20 TX |
45° mounting surface thinner width allows closer block placement in restricted areas. Welded with 7018 or 8018 low-hydrogen rod. |
|
T29939 |
C20HD KM |
45° mounting surface heavier block design than the C20 block. Welded with 7018 or 8018 low-hydrogen rod. |
| Part number | Code | Description |
|---|---|---|
| T29168 | TX205D | Standard pilot on TXD series augers. Dirt, compacted soil, clay material. Includes hardware PN 36026 & 15506. |
| T29665 | TX205C | Standard pilot on TXC series augers. For fractured & non-fracturable material, Includes hardware PN 36026 & 15506. |
| T29200 | TX183 | Pilot bit adapter, TX183, cast steel (standard with TX205C & TX205D) Includes hardware T42675 & T5973. |
| T29936 | C6 1/2 87 C387LR | Standard on TXCS series augers. Five replaceable C87 teeth (T29914). Includes hardware PN T42675 & T5973. |
| T16845 | TPB6 | Standard on TRA/STEP/BLADE series augers. 4-3/4” cut diameter 2-3/8” API. |
| T80342 | Collar | Use with T80342 sub. Sub, pilot, 4” diameter, 2-3/8” API |
| 65345795 | TPB1-HEX | Standard for BTA series augers. 2-5/8” hex shank Four replaceable C10 teeth (65349085) |
| 65357524 | SPIRAL HEX | Use with 65343434 sub Standard for BTA spiral series augers. 2-5/8” hex shank Six replaceable teeth (65349085) |
| 65343434 | TBA-HEX | 2-5/8 hex collar. |
| 65345810 | COR PILOT | Sub, 2-5/8 ” hex collar Standard for digger derrick core barrel series. 2-5/8” hex coupler Four replaceable C10 teeth (65349085) |
| Other configurations available upon request. | ||
|
Part number |
Code |
Description |
|
T29817 |
201 |
Normal dirt digging situations. |
|
T29450 |
211 |
Outside tooth for normal dirt digging situations. |
|
T29888 |
TK225 |
Rock cutting tooth heat treated for strength and durability. |
|
T29436 |
TX212 |
Fits W05 block. |
|
TV005053 |
134 |
Normal dirt digging situations. |
|
TA001407 |
RST20P |
For all taper-fit series teeth. Welded with 7019 or |
|
8018 low-hydrogen rod. |
||
|
TA000858 |
W05 |
For all taper-fit series teeth. Welded with 7019 or |
|
8018 low-hydrogen rod. |
||
|
T11376 |
T101 |
Normal dirt digging situations. |
|
T11370 |
TO2 |
Flat half pocket that accepts T101 tooth. Welded with 7019 or |
|
8018 low-hydrogen rod. |
Downloads
Downloads
Measurements
Power
Measurements
Measurements
Downloads
Power
Measurements
Downloads
Others
Power
Downloads
Terex® Spin Bottom Barrels Are available in a range of diameters and types.
Standard specifications are as follows:
Spin-Bottom Clean-out
Used to remove fluid type (mud) material from drilled shaft when material does not adhere to auger flighting.
Spin-Bottom/Drill
Used for drilling loose sandy soil, small cobble stones and mud conditions when material does not adhere to auger flighting.
|
Part number |
Code |
Application |
|
T29171 |
TX50/1650 |
Dirt, compacted soils, low abrasion materials, fits all TX– series shank plates & TX-50 replaceable tooth pilot. |
|
T29429 |
TX52/1652 |
Dirt, compacted soils, low abrasion materials, fits all TX-series shank plates & TX-50 replaceable tooth pilot. Recommended for outside blocks. |
|
TA029225 |
TX56/1656 |
Fractured and non-fractured materials, frozen soils, abrasive materials. Conical tips increase penetration rates in most materials. Fits all TX-series shank plates & TX50C pilot. |
|
TA029400 |
TX58/1658 |
Fractured and non-fractured materials, frozen soils, abrasive materials, conical tips increase penetration rates in most materials. Fits all TX-series shank plates & TX50C pilot. Recommended for outside blocks. |
|
65342386 |
TX56CH |
Non-fractured materials, frozen soils, abrasive materials. Tips increase penetration rates in most materials. Fits all TX-Series shank plates & TX50C pilot. |
|
65342385 |
TX58CH |
Non-fractured materials, frozen soils, abrasive materials. Tips increase penetration rates in most materials. Fits all TX-series shank plates & TX50C pilot. Recommended for outside blocks. |
|
Nominal Kelly bar size |
Part number |
Nominal Kelly box size |
Hole Size |
Hole location |
|
3.00 |
65357613 |
3.13 |
1.13 |
2.00 |
|
4.00 |
65357614 |
4.13 |
1.13 Slot |
2.00 |
|
4.25 |
65357615 |
4.38 |
1.13 |
2.00 |
|
5.13 |
65357616 |
5.25 |
1.63 |
2.00 & 5.13 |
|
5.25 |
65357617 |
5.38 |
1.38 |
2.00 |
|
6.00 |
TA000081 |
6.13 |
1.13 slot |
2.00 |
|
7.00 |
TA002081 |
7.13 |
1.75 |
2.38 & 5.25 |
|
7.25 |
TA000873 |
7.38 |
1.63 |
2.00 & 6.00 |
|
8.00 |
TA002067 |
8.13 |
1.88 & 2.81 |
1.88, 6.75 & 10.75 |
|
Other configuration available upon request. |
||||
|
Part number |
Shim box outside size |
Shim box inside size |
Application |
|
65354105 |
3.00 |
2.63 |
Shim 3" Box to 2-1/2" Box |
|
65351830 |
3.50 |
3.12 |
Shim 3-1/2" Box to 3" Box |
|
65349007 |
4.00 |
3.12 |
Shim 4" Box to 3" Box |
|
65349008 |
4.00 |
3.63 |
Shim 4" Box to 3-1/2" Box |
|
Other configurations available upon request. |
|||
|
Part Number |
Code |
Application |
|
T16844 |
TRT1 TX |
Non-fractured material, frozen soil, abrasive material. Medium to hard rock. |
|
TA510184 |
TWT2 TX |
Non-fractured material, frozen soil abrasive material. Medium to hard rock. |
|
TA029321 |
TK55C KM |
Fractured and non-fractured material. Angle of attack & conical tips increase penetration rates in most augerable materials. Hard to very hard rock. |
|
T17318 |
TDB31/D7000 TX |
Soft earth digging, and clay materials. |
|
T69322 |
TAP3 TX |
Accepts all above teeth. Welded with 7018 or 8018 low-hydrogen rod. |
Terex® Dump Bottom Barrels Are available in a range of diameters and types.
Standard specifications are as follows:
Dump-Bottom Clean-out
Used to remove fluid type (mud) material from drilled shaft when material does not adhere to auger flighting. Manual or auto dump mechanism options available.
Dump-Bottom/Drill
Used for drilling loose sandy soil, small cobble stones and mud conditions when material does not adhere to auger flighting. Manual or auto dump mechanism options available.
Coring of fractural and non-fractural rock, non-reinforced and reinforced concrete. For use when material cannot be effectively drilled with conventional rock auger tools.
|
Part number |
Code |
Application |
|
TA001375 |
RB1LRSN KM |
Small diameter tip reduces vibration during concrete cutting. Long retainer. |
|
TA001371 |
RB3LR KM |
Fractured and non-fractured materials, frozen soils, and abrasive materials. Long retainer. |
|
TA001379 |
RB3SR KM |
Fractured and non-fractured materials, frozen soils, and abrasive materials. Short retainer. |
|
T29912 |
RL08/C3LR KM |
Cutting concrete and other tough cutting applications. Long retainer. |
|
T29913 |
RL09/C3SR94 KM |
For cutting concrete and other tough cutting applications. Short retainer. |
|
T68888 |
TX1HDLR KM |
For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Long retainer. |
|
T29911 |
TX1HDSR KM |
For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Short retainer. |
|
TA001376 |
RB1SR-SN KM |
Fractured and non-fractured materials, frozen soils, and abrasive materials. Short retainer. |
|
65342401 |
RL09 TX |
For cutting concrete and other tough cutting applications. Ideal use for Spiral BTA series. |
|
T70795 |
RL11 KM |
For cutting soft to medium-hard materials with good penetration. Dimpled retainer for increased holding power in grooved blocks. |
|
65349085 |
RC1LR-SN TX |
Small diameter tip reduces vibration during concrete cutting. Long retainer. |
|
65349086 |
RC1SR-SN TX |
Fractured and non-fractured materials, frozen soils, and abrasive materials. Short retainer. |
|
TA000897 |
C1HDSR RL10 KM |
For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Short retainer. |
|
65350265 |
RC1SR-SN TX |
Fractured and non-fractured materials, frozen soils, and abrasive materials Short retainer. |
|
TA001455 |
RS16 TX |
For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Short retainer. |
|
T29941 |
C10 KM |
45° mounting surface with a narrower face than C10HD style. Welded with 7018 or 8018 low-hydrogen rod. |
|
T29942 |
C10HD KM |
45° mounting surface. Extra-heavy-duty design. Welded with 7018 or 8018 low-hydrogen rod. |
|
TA001404 |
RC10F TX |
For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod. |
|
65350264 |
RC10FS TX |
For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod. |
|
Part number |
Kelly box size |
Bar size |
Hole diameter |
Max Torque |
|
|
Ft-lb |
nm |
||||
|
T29835 |
2.50 |
2.50 |
1.13 |
32,000 |
43386 |
|
T19088 |
3.00 |
2.50 |
0.88 |
32,000 |
43386 |
|
TA001797 |
3.00 |
3.50 |
1.13 |
45,000 |
60943 |
|
T37833 |
3.00 |
4.00 |
1.13 |
67,000 |
90737 |
|
TA000704 |
3.50 |
2.50 |
0.88 |
32,000 |
43386 |
|
TA000354 |
3.50 |
3.00 |
1.13 |
45,000 |
60943 |
|
TA001800 |
3.50 |
4.00 |
1.13 |
67,000 |
90737 |
|
T29385 |
4.00 |
3.00 |
1.13 |
45,000 |
60943 |
|
T68482 |
4.00 |
3.50 |
1.13 |
45,000 |
60943 |
|
65347713 |
4.00 |
4.25 |
1.13 |
75,000 |
101571 |
|
TA001659 |
4.25 |
4.00 |
1.13 |
67,000 |
90737 |
|
65347779 |
5.13 |
4.00 |
1.13 |
67,000 |
90737 |
|
65351010 |
5.13 |
4.25 |
1.13 |
75,000 |
101571 |
|
TA000750 |
5.25 |
3.50 |
1.13 |
45,000 |
60943 |
|
TA000046 |
5.25 |
4.00 |
1.13 |
67,000 |
90737 |
|
T74055 |
5.25 |
4.25 |
1.13 |
75,000 |
101571 |
|
TA000197 |
6.00 |
4.00 |
1.13 |
67,000 |
90737 |
|
TA000781 |
7.00 |
4.00 |
1.13 |
67,000 |
90737 |
|
TA001782 |
8.00 |
5.25 |
1.38 |
118,000 |
159805 |
|
Kelly bar adapters are subject to maximum drill torque. |
|||||
|
Other configurations available upon request. |
|||||
|
Part Number |
Code |
Application |
|
T29897 |
C21 KM |
For most cutting applications. Especially good in soft to medium-hard material. Carbide tip (5/16” dia.) for fast penetration. Short Retainer. |
|
65350253 |
RC21HD TX |
Heavy duty design for extremely hard rock and concrete. Carbide tip (1/2” dia.) provides long tool life. Short Retainer. |
|
T29898 |
C21HD KM |
Heavy duty design for extremely hard rock and concrete. Carbide tip (1/2” dia.) provides long tool life. Short Retainer. |
|
T29900 |
C23 TX |
Drilling and core-barreling in soft to medium-hard rock with abrasive cutting conditions. Short Retainer. |
|
65340029 |
C23 KM |
Drilling and core-barreling in soft to medium-hard rock with abrasive cutting conditions. Short Retainer. |
|
TA001373 |
RB23 KM |
Soft to medium-hard rock with abrasive conditions. Short Retainer. |
|
T29901 |
C24 KM |
Drilling soft material. Sharp nose tip for high penetration. Short Retainer. |
|
T29938 |
RC20 TX |
45° mounting surface thinner width allows closer block placement in restricted areas. Welded with 7018 or 8018 low-hydrogen rod. |
|
T29939 |
C20HD KM |
45° mounting surface heavier block design than the C20 block. Welded with 7018 or 8018 low-hydrogen rod. |
|
Part number |
A |
B |
C |
D |
Max torque |
|
|
Kelly box |
Bar size |
diameter |
Bar length |
Ft-lb |
nm |
|
|
T47927 |
2.50 |
2.50 |
0.88 |
48 |
32,000 |
43386 |
|
65343326 |
3.00 |
2.50 |
0.88 |
48 |
32,000 |
43386 |
|
T11850 |
3.00 |
3.00 |
1.13 |
24 |
45,000 |
60943 |
|
T29849 |
3.00 |
3.00 |
1.13 |
36 |
45,000 |
60943 |
|
T29841 |
3.00 |
3.00 |
1.13 |
60 |
45,000 |
60943 |
|
TA000073 |
3.00 |
3.50 |
1.13 |
36 |
45,000 |
60943 |
|
TA000492 |
3.50 |
3.50 |
1.13 |
36 |
45,000 |
60943 |
|
65355081 |
4.00 |
4.00 |
1.13 |
36 |
118,000 |
159805 |
|
Kelly bar adapters are subject to maximum drill torque. |
||||||
|
Other configurations available upon request. |
||||||
| Part number | Description | Diameter | Teeth Qty | Part number | Description | Diameter | Teeth Qty |
|---|---|---|---|---|---|---|---|
| T29301 | TX810X | 8/10 | 1 | T29194 | TX24X2 | 24 | 4 |
| T29302 | TX12X | 12 | 2 | 65348648 | TX26/27X1 | 26/27 | 4 |
| T29224 | TX145X | 14 | 2 | 65348658 | TX26/27X2 | 26/27 | 4 |
| T29189 | TX16X1 | 16 | 2 | T29199 | TX30X1 | 30 | 4 |
| T29190 | TX16X2 | 16 | 2 | T29248 | TX30X2 | 30 | 4 |
| T29220 | TX18X1 | 18 | 3 | T29249 | TX36X1 | 36 | 4 |
| T29221 | TX18X2 | 18 | 3 | T29250 | TX36X2 | 36 | 4 |
| T29191 | TX20/22X1 | 20/22 | 3 | 65340693 | TX42X1 | 42 | 6 |
| T29192 | TX20/22X2 | 20/22 | 3 | 65340697 | TX48X1 | 48 | 7 |
| T29193 | TX24X1 | 24 | 3 |
| Part number | Description | Diameter | Teeth Quantity |
|---|---|---|---|
| T29960 | C-016 Plate with C87 Teeth | 16 | 4 |
| T29961 | C-018 Plate with C87 Teeth | 18 | 5 |
| T29962 | C-020 Plate with C87 Teeth | 20 | 5 |
| T29965 | C-024-3 Plate with C87 Teeth | 24 | 6 |
|
Part number |
Code |
Description |
|
65342191 |
C10 Bullet Pilot |
Standard on BTR series augers 12” in diameter and smaller. Four replaceable C10 teeth (PN 65349085). |
|
5-1/4” cut diameter. |
||
|
Use with T29894 sub. |
||
|
TA000818 |
Dirt Pilot |
Pilot bit, fishtail, 1-3/4” square shank. |
|
6” cut diameter. |
||
|
Use with T29894 sub. |
||
|
T29896 |
Dirt Pilot |
Standard on dirt series augers 12” in diameter or less. |
|
8” cut diameter. |
||
|
Use with T29894 sub. |
||
|
TA002069 |
C30 Bullet Pilot |
Standard on BTR series augers 14” in diameter and larger. |
|
Four C30 replaceable teeth (PN TA001537). |
||
|
6-3/4” cut diameter |
||
|
Use with TA000001 sub. |
||
|
65353918 |
C30 Bullet Spiral Pilot |
Standard on all BTR Spiral pressure tools. |
|
Six replaceable C30 teeth (PN TA001537) |
||
|
7-1/2 cut diameter. |
||
|
Use with TA000001 sub. |
||
|
TA001678 |
C4 Bullet Pilot |
Standard on BTRXHD series augers. |
|
Three replaceable C43T teeth (two TA001401 & one T29927). |
||
|
8-1/2” cut diameter. |
||
|
Use with TA000001 sub. |
|
65342191 |
C10 Bullet Pilot |
Standard on BTR series augers 12” in diameter and smaller. Four replaceable C10 teeth (PN 65349085). |
|
5-1/4” cut diameter. |
||
|
Use with T29894 sub. |
||
|
TA000818 |
Dirt Pilot |
Pilot bit, fishtail, 1-3/4” square shank. |
|
6” cut diameter. |
||
|
Use with T29894 sub. |
||
|
T29896 |
Dirt Pilot |
Standard on dirt series augers 12” in diameter or less. |
|
8” cut diameter. |
||
|
Use with T29894 sub. |
||
|
TA002069 |
C30 Bullet Pilot |
Standard on BTR series augers 14” in diameter and larger. |
|
Four C30 replaceable teeth (PN TA001537). |
||
|
6-3/4” cut diameter |
||
|
Use with TA000001 sub. |
||
|
65353918 |
C30 Bullet Spiral Pilot |
Standard on all BTR Spiral pressure tools. |
|
Six replaceable C30 teeth (PN TA001537) |
||
|
7-1/2 cut diameter. |
||
|
Use with TA000001 sub. |
||
|
TA001678 |
C4 Bullet Pilot |
Standard on BTRXHD series augers. |
|
Three replaceable C43T teeth (two TA001401 & one T29927). |
||
|
8-1/2” cut diameter. |
||
|
Use with TA000001 sub. |
|
65349023 |
Dirt Pilot |
Standard on dirt series augers 16” to 84” in diameter. |
|
8” cut diameter. |
||
|
Use with TA000001 sub. |
||
|
TA002043 |
Dirt HD Pilot |
Standard on dirt series augers. 96” and larger in diameter. 11” cut diameter. |
|
Use with TA000001 sub. |
||
|
T16845 |
TPB6 |
Standard on BLADE (TRA) series augers |
|
4-3/4” cut diameter. |
||
|
Use with T80342 sub. |
||
|
T70797C |
TPB1 |
Optional on BTR series augers. |
|
Four replaceable C10 teeth, (PN 65349085) |
||
|
5-1/4” cut diameter. |
||
|
Use with T80342 sub. |
||
|
65356030 |
C10 Bullet Pilot |
Optional on BTR series augers |
|
Six replaceable C10 teeth, (PN 65349085) |
||
|
6-1/4” cut diameter. |
||
|
Use with T80342 sub. |
||
|
65342406 |
C30 Bullet Pilot |
Optional on BTR series augers. |
|
Four replaceable C30 teeth, (PN TA001537) |
||
|
6-3/4” cut diameter. |
||
|
Use with T80342 sub. |
|
TA000870 |
PB87 |
Optional on BTR series augers. |
|
Four replaceable C87 teeth, (PN T29914) |
||
|
4-1/2” cut diameter |
||
|
Use with T80342 sub. |
||
|
TA000132 |
TPB9 |
Optional on BTR series augers. |
|
6” cut diameter. |
||
|
Use with T80342 sub. |
||
|
65355221 |
C20 Spiral Pilot |
Six replaceable C20 teeth (PN T29897) |
|
6-1/4” cut diameter. |
||
|
Use with TA000905 sub. |
||
|
TA000871 |
C30 Bullet Pilot |
Three replaceable C30 teeth (PN TA001537). |
|
5-1/2” cut diameter. |
||
|
Use with TA000905 sub. |
||
|
65342192 |
C30 Bullet Pilot |
Four replaceable C30 teeth (PN TA001537). |
|
6-1/2” cut diameter. |
||
|
Use with TA000905 sub. |
||
|
TA001081 |
C4 Bullet Pilot |
Two replaceable C4 teeth, (PN T29927). |
|
5-1/4” cut diameter. |
||
|
Use with TA000905 sub. |
|
TA000934 |
Pilot |
Replaceable C87 teeth, (PN 65356913). |
|
Replaceable center bit. (PN T29934). |
||
|
6-1/4” cut diameter. |
||
|
Use with TA000930 sub. |
||
|
TA001077 |
Pilot |
Replaceable C30 teeth, (PN TA001537). |
|
5” cut diameter. |
||
|
Use with TA000930 sub. |
||
|
TA000928 |
Pilot |
Replaceable C30 teeth, (PN TA001537). |
|
5-1/2” cut diameter. |
||
|
Use with TA000930 sub. |
||
|
TA001083 |
Pilot |
Replaceable C4 teeth, (PN TA029927). |
|
5” cut diameter. |
||
|
Use with TA000930 sub. |
|
Part Number |
Code |
Application |
|
T29916 |
SM06 KM |
For drilling hard rock or concrete. Double-angle tip for maximum impact strength. |
|
T29917 |
SM02 KM |
For asphalt or abrasive applications. Sharp tip for improved penetration. |
|
65356913 |
SM02 TX |
For asphalt or abrasive applications. Sharp tip for improved penetration. |
|
T29914 |
TX87LR KM |
Hard rock or concrete. Sharp tip for improved penetration. |
|
T29915 |
C387LR KM |
For asphalt or abrasive applications. |
|
T29945 |
C87B KM |
45° mounting surface heavy duty design (has machined step for non-rotating tools). Welded with 7018 or 8018 low-hydrogen rod. |
|
T29946 |
C87HDS KM |
45° mounting surface extra heavy duty design (has machined shoulder in bore to provide extended life. Welded with 7018 or 8018 low-hydrogen rod. |
| Part Number | Hex Hub Size | Part Number | Description |
|---|---|---|---|
| TA000748 | 2.00 | TA001113 | 2.00"HEX x 2.50"BAR |
| T29641 | 2.50 | TA000100 | 2.50"HEX x 2.00"BAR |
| T70463 | 2.62 | TA000853 | 2.50"HEX x 2.62"BAR |
| TA000474 | 3.00 | TA000099 | 2.62"HEX x 2.00"BAR |
| TA000561 | 2.62"HEX x 2.50"BAR | ||
| TA001980 | 3.00"HEX x 2.50"BAR | ||
| Other configurations available upon request. | |||
| Style | Part Number | Description |
|---|---|---|
| S | 45142 | ASSY, 2" X 2" SLIP ON |
| S | 437927 | ASSY,2" X 2-5/8" SLIP ON |
| I | 11448 | BUSHING 2" X 2-5/8" |
| C | 9127787 | ASSY,2" X 2.50" CLAMP ON |
| C | 9119389 | 2-1/2" X 2-1/2" CLAMP ON |
| S | 431390 | ASSY,2-1/2" X 2-5/8" SLIP ON |
| S | 45143 | ASSY,2-5/8" X 2-5/8" SLIP ON |
| Assemblies include retainer ring and hardware. | ||
|
Part number |
Code |
Description |
|
TA000930 |
Collar |
Sub, 2-7/8” IF |
|
TA000905 |
Collar |
Sub, 2-7/8” API |
|
T80342 |
Collar |
Sub, pilot, 4” diameter, 2-3/8” API |
|
TA000001 |
Collar |
Sub, 3” square |
|
T29894 |
Collar |
Sub, 1-3/4” square. |
|
TA001970 |
Pin |
Pin, 1-3/4” square shank |
|
Use with PN T29894 sub. |
||
|
TA000011 |
Pin |
Pin, 2-3/8” API Threads |
|
Use with PN T80342 sub. |
||
|
65343334 |
Pin |
Pin, 2-5/8” hex shank |
|
Use with PN 65343434 sub. |
||
|
TA000906 |
Pin |
Pin, 2-7/8” API Threads |
|
Use with PN TA000905 sub. |
||
|
TA000929 |
Pin |
Pin, 2-7/8” IF Threads |
|
Use with PN TA000930 sub. |
||
|
TA001862 |
Pin |
Pin, 3” square shank |
|
Use with PN TA000001 sub. |
|
Part number |
Code |
Application |
|
T29919 |
C31 KM |
For soft to hard rock and concrete. Carbide tip (3/8” dia.) provides strength and long tool life. |
|
65350198 |
C31 TX |
For soft to hard rock and concrete. Carbide tip (3/8” dia.) provides strength and long tool life. |
|
T29821 |
C32 KM |
For drilling most soils and broken or laminated rock. |
|
TA001370 |
RB31HD KM |
For drilling most soils and broken or laminated rock. |
|
TA001377 |
RB31SN-FL TX |
For drilling most soils and broken or laminated rock. |
|
TA001372 |
RB40XHD KM |
For drilling most soils and broken or laminated rock. |
|
TA001399 |
RC31XHD,TX |
For drilling most soils and broken or laminated rock. |
|
TA001537 |
RC31HD TX |
For drilling most soils and broken or laminated rock. |
|
T29228 |
TX40HD KM |
For drilling most soils and broken or laminated rock. |
|
T29920 |
TX31HDLR KM |
For drilling in soft to hard rock and concrete. |
|
TA000695 |
U40HD KM |
For augering and tunnel boring in extremely hard rock and concrete. Ballistic-style tip provides high impact strength. |
|
T69176 |
C30 TX |
45° mounting surface, accepts all short retainer teeth. Weld with 7018 or 8018 low-hydrogen rod. |
|
TA001405 |
RC30F TX |
For buckets, barrels, and special applications. Weld with 7018 or 8018 low-hydrogen rod. |
|
T29947 |
C30H/U40H KM |
45° mounting surface, Accepts all short retainer and snap ring teeth. Weld with 7018 or 8018 low-hydrogen rod. |
| Part number | Bar size | Length |
|---|---|---|
| *11579 | 2.00 | 60.00 |
| T80597 | 2.00 | 72.00 |
| *9122145 | 2.50 | 60.00 |
| T80598 | 2.50 | 72.00 |
| **T54911 | 2.62 | 60.00 |
| 65357478 | 2.62 | 60.00 |
| T80599 | 2.62 | 72.00 |
| Other configurations available upon request | ||
| Part number | Hub | Bar | Length | Max torque | |
|---|---|---|---|---|---|
| Ft-lb | nm | ||||
| T80600 | 2.00 | 2.00 | 72 | 6,000 | 8126 |
| T82154 | 2.50 | 2.00 | 72 | 6,000 | 8126 |
| T84698 | 2.00 | 2.50 | 72 | 12,000 | 16251 |
| T71579 | 2.50 | 2.50 | 72 | 12,000 | 16251 |
| 65343450 | 2.50 | 2.50 | 60 | 12,000 | 16251 |
| T80601 | 2.50 | 2.62 | 72 | 14,000 | 19040 |
| T81388 | 2.62 | 2.50 | 72 | 12,000 | 16251 |
| 65347717 | 2.62 | 2.62 | 36 | 14,000 | 19040 |
| 65345762 | 2.62 | 2.62 | 60 | 14,000 | 19040 |
| T80602 | 2.62 | 2.62 | 72 | 14,000 | 19040 |
| Other configurations available upon request | |||||
Application:
Hollow kelly bar with spring loaded cam action locking dogs allow it to be used as both an auger extension shaft and a screw anchor drive. This allows the screw anchor rod to be inserted directly into the kelly bar and eliminates the need for a screw anchor adapter.
| Part number | Description | Hub | Bar |
| 445231 | 1.62 dia hole thru (2.16 OD x 1.46 ID sq tube for driving anchors) For 1.38” screw drive |
2.00 | 2.62 |
| 402331 | 1.62 dia hole thru (2.16 OD x 1.46 ID sq tube for driving anchors) For 1.38” screw drive
|
2.50 | 2.62 |
| 402330 | 1.62 dia hole thru (2.16 OD x 1.46 ID sq tube for driving anchors) For 1.38” screw drive |
2.62 | 2.62 |
| 470331 | 1.62 dia hole thru (2.16 OD x 1.54 ID sq tube for driving anchors) For 1.50” screw anchors |
2.62 | 2.62 |
|
Part number |
Code |
Application |
|
T29926 |
C4/U44 KM |
For large diameter extra heavy duty style augers. Hard Rock conditions. |
|
T29927 |
C4-1 KM |
For large diameter extra heavy duty style augers; deep cutting applications. Medium Rock conditions. |
|
TA029927 |
C41 TX |
For large diameter extra heavy duty style augers. |
|
TA001532 |
RCDS05 |
For drilling and tunnel boring in the most extreme hard rock and concrete. |
|
TA000789 |
DS05 KM |
For drilling and tunnel boring in the most extreme hard rock and concrete. |
|
T29930 |
C7 KM |
For most cutting conditions. No collar. |
|
TA001402 |
RC4SSF TX |
For drilling in soft to medium-hard abrasive cutting conditions. Snap ring attached. |
|
TA001401 |
RC4LSF TX |
For medium to hard drilling conditions with added collar to prevent material from entering block and stopping tooth rotation. |
|
TA001406 |
RC4F TX |
For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod. |
|
T70796 |
RC4 TX |
45° mounting surface heavy duty design accepts all step shank tools. Welded with 7018 or 8018 low-hydrogen rod. |
|
TA000679 |
Snap Ring |
C4 Teeth Snap Ring |
|
65343300 |
Retainer Clip |
Push on Retainer Clip |
